ARGUMENTATIVE PAPER-Assignment 2: Writing And Receiving Reviews

Questions Which May Help You Write Your Review
1. Has the writer chosen an interesting, original, and relevant title? If so, please explain what makes it interesting. If not, offer an alternate title.
2. Does the writer write an effective, attention-grabbing introduction that provides necessary background information and establishes the controversy surrounding the issue? If so, what makes the introduction effective? Be specific in your answer. Is the introduction adequate in length (no more than 1 page)? The introduction should be a minimum of 6 sentences. If it isn’t, provide suggestions for lengthening the introduction. Write the thesis statement down.
5. Does the writer unify his or her essay by beginning every body paragraph with a topic
sentence that discusses a reason for/against the issue? Remember, a topic sentence is the first sentence of a paragraph, and it tells exactly what is going to be discussed (argued) in the paragraph. Write down the topic sentence for every paragraph. Then, discuss each topic sentence. If the topic sentence works, explain why. If it doesn’t work, explain why and offer suggestions for revision.
6. Does the writer develop every body paragraph with sufficient supporting evidence, such as facts, statistics, examples, and expert opinions, from sources? Pick one paragraph which works well. Discuss this paragraph. What makes it work well? Be very specific in your answer. Then, pick a paragraph that does not work well. Explain why it doesn’t work well and make revision suggestions.
7. Does the writer avoid faulty logic and reasoning? Please provide one example where the writer’s logic works well. Please provide one example where the writer’s logic is faulty or needs further tweaking. Provide revision suggestions.
8. To your knowledge, has the writer made any obvious grammatical errors like fragments, comma splices, run-ons? If so, indicate where.
9. Has the writer written an argumentative essay, or has he or she merely written an informative work? Where can the writer better add to his/her supporting reasons? Be very specific in your answer here.
10. Has the writer addressed counter-arguments (i.e., addressed what the opposing side will say)? Provide an example where the writer effectively addresses a counter-argument. Provide an example where the writer does not effectively address a counter-argument and make revision suggestions.

Components of the ER systems of Germany and the UK-Compare and contrast the key components of the ER systems of Germany and the UK, focusing on employee relations/HR and industrial relations

1. Using a theoretical framework from this semester, compare the key
components of the ER systems of Germany and the UK.
• Choose a theoretical framework that was used prominently such as Varieties of Capitalism (VoC). In this example,
define what VoC is and briefly discuss its significance and shortcomings
in the study of employment relations. Identify which country is the CME
and which is the LME and state why.
• Compare and contrast the key components of the ER systems of Germany
and the UK, focusing on employee relations/HR (the nature of employee
participation in the decision making process within enterprises) and
industrial relations (the nature of trade unions and employer
organizations, collective bargaining and pay setting, and employment
security)
• Analyse the key differences and similarities between the two ER regimes
and conclude with what works better and if there is any scope for
improving the two ER regimes based on the analysis you have done on
each country
OR
Convergence and divergence
Look at Marion Festing’s article on whether German HRM is converging
with the US or not.
2. Using examples of MNCs from this semester, explain the relationship
between home country policies and those applied in host foreign
countries.
2
Consider the MNCs used in our case studies and pick a couple which best
illustrate how an MNC’s home country policies can differ (or be similar with)
from those used in foreign countries where they also operate. (GMH as an LME
country of origin moving to CME such as Germany, also US Chrysler and
Italian Fiat; China, WalMart in the USA and China, etc.)
• Explain why you chose a particular MNC by highlighting the stark difference
in how they interact with workers and the state. How are their outcomes
different in these two jurisdictions? How are their ER processes and outcomes
similar or different in these two countries?
3. ILO Conventions and International Framework Agreements (IFAs)
are supposed to protect workers’ rights in countries which sign up to
these. What is the reality underpinning Conventions and IFAs? What
do you recommend should be done to improve worker protections
under Conventions and IFAs given the exploitation of workers in
MNCs supply chains?
Begin your discussion by defining what the ILO and IFAs are. Outline the roles
they play in safeguarding the rights of workers globally
• Recall our discussion in class: Do ILO Conventions and IFAs actually do
their part in protecting workers? What are they doing right? How can they
better ensure that workers’ rights and entitlements are observed?
• Remember that ratifying ILO Conventions are voluntary. What does this
mean for workers in countries which opt/do not opt to become party to
certain international labour instruments? In countries which ratify ILO
Conventions, what can you say about how well their legal regimes carry
out their obligations? Are there any issues on monitoring for compliance
and enforcement? How can these issues be resolved?
3
• Also remember that there are only a handful of IFAs executed between
MNCs and global workers’ organizations, and that their provisions are
observed primarily on a best-effort basis.
4. Choose any two countries covered this semester, including the
presentation/essay country of your choice (but not Germany or the
UK) and explain the national contexts, including the role of the state
(i.e. government), the nature of trade unions across the two nations,
and collective bargaining across the two nations.
When deciding on which two countries to analyse, explain why you chose those
countries and why they are highly relevant in this discussion.
• Be as detailed as possible when explaining the countries’ national
contexts. Focus on the role of the state (labour legislation, labour
institutions and processes that affect employment relations such as the
regulation of unions, the promotion of collective bargaining and the use
of CBAs, availability of dispute resolution mechanisms), the state of trade
unionism (Are they recognised by both the state and employers’
organizations? What can you say about the levels of membership? How is
this impacting the way workers’ rights and entitlements are established
and protected?), and the existence of employers’ organizations (How
would you describe the nature and level of their interactions with trade
unions and the government?). Do the three industrial relations actors
interact well with each other?
• Do the levels of trade union membership in these countries result in an
increase or a decrease in collective bargaining? What is the impact of the
existing collective bargaining agreements on pay and working
conditions?
4
• Compare the two countries and in your conclusion, and make sure that
you support the argument that you set out in the introductory part of your
answer.
5. Should MNCs be forced to comply within minimum labour standards
in all countries in which they operate? Why/why not? Illustrate your
answer with some examples of MNCs studied this semester.
Based on our case studies, we have come to the conclusion that MNCs must be
able to at least comply with the legally established minimum labour standards in
all countries in which they operate. This ensures that they do not end up in
expensive labour conflicts with both workers and the government
• Define what labour standards are and why it is important for governments
to establish their minimum levels them and for employers to observe
these
• Complying with minimum standards ensure that employees legal rights
and entitlements are met. Look into how well Samsung operates in South
Korea and what problems they ran into in China
• You can also incorporate into your discussion the reputational damage
MNCs suffer as a result of their noncompliance with minimum labour
standards in the countries they operate
6. How can MNCs from one type of market economy adapt to operating
in another type of market economy? What does this tell you about
differences between these two types of employment relations
systems?

Process Modeling Vs. Configuration Management

Write a three (3) page paper in which you determine which is more applicable across the widest possible range of situations: process modeling or configuration management. Be sure to explain your rationale.
The format of the paper is to be as follows:

  • Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
  • Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.

Note: You will be graded on the quality of your answers, the logic/organization of the report, your language skills, and your writing skills.

  •  Fully determined which is more applicable across the widest possible range of situations: process modeling or configuration management. Completed with 90-100% accuracy, thoroughness, and logic.
  •  Explanations very clear and well organized.
    (Added helpful details)

cis254-menu selection

Assignment 2: Menu Selection Due Week 6 and worth 80 points

Despite being a fairly old technology, menu-driven interfaces are very common in user interface design.  Menu-driven interfaces consist of a series of screens which are navigated by choosing options from lists. 

 

Write a four to five (4-5) page paper in which you:

1. Evaluate the user dialog strategies used by a menu-driven interface.

2. Determine why menu-driven interfaces continue to be popular in the modern computing age.

3. Suggest at least three (3) strategies for making menu-driven interfaces visually appealing in the modern computing environment.

4. Suggest alternatives for menu-driven interface design and explain how these alternatives can be designed to eventually replace all menu-driven interfaces.

5. Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.

Your assignment must follow these formatting requirements:

. Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.

. Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.

The specific course learning outcomes associated with this assignment are:

. Explain and describe the process of menu selection and organization.

. Analyze and evaluate interface design models.

. Use technology and information resources to research issues in human-computer interaction.

. Write clearly and concisely about HCI topics using proper writing mechanics and technical style conventions.

Technology and Organizational Behavior Issues 

Technology and Organizational Behavior Issues 
You are to write a six to eight (8–10) page paper that answers the  following: During the 1970s, the U.S. Air Force Program for Integrated  Computer-Aided Manufacturing (ICAM) sought to increase manufacturing  productivity through systematic application of computer technology. As  companies, systems products and markets become even more complex we will  need even more complex modeling to guide and help us make decisions.
1)Describe the culture of your organizational behavior issues and what challenges are present.
2)Discuss the systems that are the most appropriate to introduce into your organization.
3)Analyze a few of the systems that can have the greatest impact on your organization.

Assignment 1: Business Process and Functional Modeling-CIS Week 4 Assignment

Assignment 1: Business Process and Functional Modeling
Due Week 4 and worth 110 points
Advanced Business Systems (ABS) is a consulting and staffing company providing specialized staffing and consulting services to clients in a variety of different industries. It has offices in major U.S. metro areas and has ongoing relationships with Fortune 500 companies. Its areas of services range from software development and network engineering to geo-information systems. It has 50 plus regional offices in U.S. and five (5) offices in Canada. It plans to expand to other countries in the future.
When an ABS client company determines that it will need a contractor or temporary professional, it issues a staffing request against the contract it had previously negotiated with ABS. The contract manager in ABS reviews the staff request and ensures that the request is valid with its current contract with its client from the database.

  • If the request is not valid, the contract manager sends the staffing request back to the client and explains the reasons and asks for the need for starting a new contract.
  • If the request is valid, the contract manager will start recruiting requests by putting the request into its staffing database. The staffing request is then sent to ABS placement department.

In the placement department, the placement specialists will check the job requirements and candidate’s qualifications.

  • If there is a qualified candidate, the specialist will notify the candidate and put a note in the database.
  • If a qualified candidate cannot be found or not immediately available, the specialist notifies contract managers and the recruiting department; the recruiting department starts searching outside immediately.

The recruiting department normally has 30 days to find an outside candidate and send the qualified candidates to the placement department to review. If an internal qualified candidate is confirmed with  his / her availability, the confirmation will be sent to the arrangement department. In the arrangement department, the candidate works with the specialists to further confirm the placement details, such as starting date, location, compensation (e.g., per diem), and travel arrangement. The final confirmation will be sent to the client along with a billing schedule. If the client agrees with the arrangement, he/she acknowledges the arrangement with contract managers in the contract department. The contract manager then puts a memo into its database and closes the request.
Write a four to five (4-5) page paper in which you:

  1. Create a use-case diagram to include at least three (3) actors for the system described in this case through the use of graphical tools in Microsoft Word or Visio, or an open source alternative such as Dia. Note: The graphically depicted solution is not included in the required page length.
  2. Create an activity diagram for the business process described in this case through the use of graphical tools in Microsoft Word or Visio, or an open source alternative such as Dia. Note: The graphically depicted solution is not included in the required page length.
  3. Develop a use-case description for each major use case.
  4. Verify and validate the functional models for this case.
  5. Create a high-level requirements document which captures the major functions of the system.

Your assignment must follow these formatting requirements:

  • Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
  • Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
  • Include charts or diagrams created in Visio or Dia. The completed diagrams / charts must be imported into the Word document before the paper is submitted.

The specific course learning outcomes associated with this assignment are:

  • Procure, document, and scope IT project requirements with use cases.
  • Use technology and information resources to research issues in procuring and designing project requirements.
  • Write clearly and concisely about project requirements and design topics using proper writing mechanics and technical style conventions.

Click here to view the grading rubric.