The Committee of Sponsoring Organizations of the Treadway Commission (COSO)

I need 5 web based i.e. www.xxx.com current 2015-2018 references.
one page in length is fine this is a follow up to a discussion question.
The Committee of Sponsoring Organizations of the Treadway Commission (COSO) is an institution that five private sector organizations formed in 1985 to combat corporate fraud. The commission came up with five components of the SOCO framework. They are the control environment, control activities, risk assessment, information and communication and monitoring.
Can you describe what the most important requirement in the decision cycle in order to be able to effect control?

soled work design for a fork lift

please read the Clint pref attachment.
I need a soled work design for a fork left.
A battery and a DC motor will be pleased on the back of the base.
the fork will be moved by a wire rope connected from the fork to the motor through a poly on top of the mast.
the material for building the fork lift is a mild carbon steel , an attachment of the mild steel cross section measurement is provided.
a free hand sketch is in the attachment to help if needed.
 
Each part of the fork lefter must be isolated ( the base , the mast , the fork) in different file and then they should be joined together in one single file named Assembly.
(if use can blog the metrical density in the soled work)

Applying Systemic Approaches

Unit 6 Discussion 1
Applying Systemic Approaches
Select a speaker who shared their story of recovery in the Psy8430: Portrait of Addiction video viewed in Unit 2. Assume that they present for treatment as they were when they were early in recovery with their family or significant other. Describe how a specific systemic treatment approach could be used to assist the couple or family and how it might be applied given what the speaker describes of their life before recovery. (Note that the speakers are identified by name at the end of the film at 53:40.)
Response Guidelines
Respond to the main discussion posts of two learners. What reactions do you have to the ideas they have presented? Include examples from the course readings or your own experience to support your perspective, and raise questions to continue the dialogue.
Resources
· Discussion Participation Scoring Guide.
· Portrait of Addiction. | Launch Presentation.
Please S25.00 for the Assignment. Due (Monday) 2/12/2018.
 

Rearing of Slave Children and Their Parental Relationships Before and After Emancipation 

I need to get an A. No plagiarism. Total answer 600 words
The Rearing of Slave Children and Their Parental Relationships Before and After Emancipation 
Read the article.
http://repository.cmu.edu/cgi/viewcontent.cgi?article=1029&context=shr
The Rearing of Slave Children and Their Parental …The Rearing of Slave Children and Their Parental Relationships Before and After Emancipation Catherine Marquis “The craving for an interpretation of history is so …repository.cmu.edu
Part 1. Answer the critical thinking questions listed below:
(a) Do these assumptions seem reasonable in this context? Why or why not?
(b) Are any generalisations being made? Are these generalisations reasonable here?
(c) Do any claims seem too certain?
(d) Are there suitable examples?
(e) Are there claims which are based on authority for support? What kind of authority is it? Does this seem reasonable?
(f) Are there claims which are based on evidence for support? What kind of evidence is it? Does this seem reasonable?
Part 2. You are to create 8 robust academic questions and answers (Q&A) based on the reading.

develop a Job Application Cover Letter

Find a specific job opening posted online within the last 9 months. You will develop a Job Application Cover Letter (as though you were applying to that position) that highlights and emphasizes why you are the most suitable candidate for this position. For the purposes of this assignment, you can present yourself as a recent graduate if needed.
Complete the cover letter on page 1 of the submission and then include a link to the job posting on page 2 (a copy and paste of the link is acceptable and the link must work). To compose the letter, use the general writing guidelines on pp. 277-278 in the text for structural and content guidance. Note: An example can be found on p. 250, Figure 13.8.
The message should take the form of a business letter; however, you will submit your assignment to the online course shell.
The job letter / application message must adhere to the following requirements:
1. Content
a. Highlight relevant background and job history information specific to the opening.
b. Emphasize significant qualifications and exclude nonessential ideas.
2. Format
a. Follow proper letter formatting techniques per business letter format.
b. Use an appropriate and professional greeting and closing.
3. Style
a. Use professional language.
b. Paragraphs effectively developed and efficient. Note: Six (6) or seven (7) lines when possible.
4. Mechanics
a. Ensure there are no grammar or spelling errors.
b. Eliminate wordiness and unclear sentence construction.
Your assignment must be typed, single-spaced paragraphs and double spaced between the paragraphs, using Times New Roman font (size 12), with one-inch margins on all sides.
The specific course learning outcomes associated with this assignment are:
1. Plan, create, and evaluate professional documents.
2. Write clearly, coherently, and persuasively using proper grammar and mechanics, and formatting appropriate to the situation.
3. Deliver professional information to various audiences using appropriate tone, style, and format.
4. Develop presentation skills for use in the professional environment.

Clint pref attachment

please read the Clint pref attachment.
I need a soled work design for a fork left.
A battery and a DC motor will be pleased on the back of the base.
the fork will be moved by a wire rope connected from the fork to the motor through a poly on top of the mast.
the material for building the fork lift is a mild carbon steel , an attachment of the mild steel cross section measurement is provided.
a free hand sketch is in the attachment to help if needed.
 
Each part of the fork lefter must be isolated ( the base , the mast , the fork) in different file and then they should be joined together in one single file named Assembly.
(if use can blog the metrical density in the soled work)